Rippin_Rod
Newbie
Reged: 09/12/08
Posts: 2
|
|
We are using Cubase LE 4 with the Presonus Firestudio Project. We cannot monitor input, either through headphones or powered monitors. On very rare occassions, it will start working, and then stop again for long periods. We have been d@#%ing around with it since June when we bought the stuff and really need to figure out what the problem is. Please help. THANKS! Rod
|
JohnnySixString
Journeyman
Reged: 06/22/08
Posts: 87
|
|
Can you see the monitor respond and hear it in the Firecontrol panel's mixer? Have you tried changing the FSP to "safe mode"?
--------------------
|
Rippin_Rod
Newbie
Reged: 09/12/08
Posts: 2
|
|
I do see the monitor responding. I believe you are asking if it registers level/input. The software and harware indicate they are receiving input. In fact, it will record the input and we can hear it on playback. Just cannot hear the input as it is being inputted.
I don't know how to change FSP to safe mode.
See attached image of main screen.
Thank for your willingness to help.
Edited by Rippin_Rod (09/13/08 11:54 AM)
|
JohnnySixString
Journeyman
Reged: 06/22/08
Posts: 87
|
|
This is without Cubase LE (or any other audio program) opened, just the Firecontrol panel: When you open the Firecontrol panel and the mixer for outputs 1/2 are not "engaged" it looks like this....
You shouldn't be able to hear anything at that point, since the mixer is off. When you engage the mixer for outputs 1/2 the mixer opens and looks like this...
At that point you should be able to see the meter respond and also hear from both outputs 1/2 and the headphones, provided you have monitors connected to the 1/4" outputs on the back of the FSP and/or headphones plugged in. I just wanted to show what it's supposed to look like when working properly. Let me know if your setup looks the same or different.
This is how you change it to Safe Mode, although I'm not sure that has anything to do with your problem, since you're able to record fine...
Of course, this would just tell you the FSP/Firecontrol is working. When you click the monitor button on in a Cubase track, you should be able to hear your input, even with the Firecontrol's mixer off. You can record and hear playback, so obviously the input and outputs should be correct in Cubase LE. I'm not sure if it's the FSP or Cubase, but it sounds like it has something to do with Cubase LE's setup somewhere.
|
Previous
Index
Next
Threaded
Edit
Reply
Quote
