The first thing you need to know is that any insert effects loaded into
the input channels will get recorded to disk with the audio. If you only
want to monitor with the effects and not actually record them
to disk with the audio, you should place the insert effects on the audio
track and not the input track.
In order for the effects to be heard you must be monitoring through
Cubase/Nuendo and not the hardware.
To place the effect on an input channel press the F3 key to open the
mixer. With the mixer open you should make sure you can see the insert
effects slots.
In the image above, there is a bar dividing the
input channel from the audio (Audio 01) channel.
You can load your insert effect into any available slot on the input channel.
After loading the insert effect into the input channel you will now be
able to record that effect to disk along with the audio coming in on that
input channel. |
